New DX Feeds (Settings -> Features -> Online -> Off-Air Services -> "DX Feeds", off by default)
Beacon spots (BEACON / NCDXF) are ignored
New Settings -> Feeds tab (shown while DX Feeds is on):
CW, Digital and Phone: which spots to receive, for the Feed Roster and the map (all on by default)
Feed Spots Max Age: how long feed spots stay on the map, 1 to 60 minutes (default 5 minutes)
Clear All Feeds: clears all feed data received (Feed Roster and map); new spots keep arriving
Feed spots are kept for an hour after they were last spotted; the map shows them per Feed Spots Max Age, the Feed Roster per its own Roster Max Age (up to 1 hour, default 2 minutes)
Call Roster
New "Call Roster | Feed Roster" tabs at the top of the roster window (shown when DX Feeds is on)
The Call Roster shows WSJT-X/JTDX decodes only; feed spots are in the Feed Roster
The settings pane is titled "Call Roster Settings" or "Feed Roster Settings", and opens below the tabs: click a tab to switch rosters without closing settings
New "Reset Columns To Default" in each roster's Settings -> General: resets that roster's columns and order only
The Feed Roster swaps the Call Roster's yellow and cyan (callsigns, grids, active tabs, Settings button) to tell them apart
Settings -> Audio Alerts: new "Call Roster | Feed Roster" sub-tabs (shown when DX Feeds is on)
Each roster has its own alert choices, sounds and speech (Type, On Single, On Multiple), Reference and Exceptions, kept in step with that roster's own controls; Rules are Call Roster only
The bell next to a roster's Wanted choices opens its own Audio Alerts sub-tab
Sliders in the roster window now show "(Use Arrow Keys For Smaller Increments)" on hover, like the main window; translated in both
DXCC column: click to center the map on the entity and highlight (dazzle) its outline, like clicking a Grid
Fixed dragging the Band or Mode column when it is shown for multiple bands or modes but not enabled
Hidden columns now keep their place when other columns are dragged
Its own Logbook, Hunting, Wanted, Exceptions, Watchers, columns, sorting, compact mode and Roster Max Age
One set of settings for all bands and modes (Band/Mode Memory applies to the Call Roster only)
Its own Ignores (Callsign, DX DXCC, DE DXCC, DE Cont, Grid, CQ Zone, ITU Zone and Spotter), separate from the Call Roster's
DE DXCC drops spots reported by spotters in that entity, DE Cont by spotters on that continent; right-click a DX DXCC, DE DXCC or DE Cont entry to ignore it
Triangle before the callsign: a rig is on the spot's band and mode, left-click sets the DX call and grid on that rig
Otherwise the spot is read-only, hover shows how to work it
"Gen Msgs" works on any feed spot, using a rig on the spot's band and mode, otherwise the active rig
Freq column shows the spot's frequency
"CQ" column: ✔ when the spot's comment starts with CQ (any case), except "CQ Contest"
US feed spots get the same state and county lookups as decodes
POTA: feed spots get the activator's park from a park reference in the spot's comment, otherwise like decodes (current POTA spot or scheduled activation), or "?-????" for a "CQ POTA" spot; works with Wanted POTA and the POTA column
The park sticks: a later spot without one doesn't erase it, and newer information (a spot naming another park, or a newer POTA spot) replaces it, so an activator who moves parks is picked up
"Feeds" tab in the Feed Roster's Settings:
Allow Alert Script for feed spots (audio alerts are set in Settings -> Audio Alerts -> Feed Roster)
Allow Notifications (Pushover, Simplepush) for feed spots
Feed spots never trigger Custom Alerts
Modes: one tick box per mode seen in feed spots; untick a mode to hide its spots in the Feed Roster (every mode seen is remembered, ticked or not)
Bands: choose which bands' feed spots appear, based on a US or non-US band plan (all bands on by default)
"Spotter" column: the station that reported a feed spot
Right-click a spotter for Lookup, Add Watcher (a Spotter watcher), Copy, Ignore Spotter or Edit Ignores
"DX DXCC" column (the Call Roster's DXCC column) and new "DE DXCC" column: the spotter's DXCC entity
"DX Cont" column (the Call Roster's Cont column) and new "DE Cont" column: the spotter's continent
Exceptions (in the Feed Roster and Settings -> Audio Alerts -> Feed Roster): "Not My DX DXCC" and "Only My DX DXCC" for the spotted station
New "Hide Self-Spotters": hides spots where the station spotted itself (W1AW-#, W1AW/P and VE/W1AW count as W1AW)
"..." opens the Feed Roster's Exceptions settings tab, which has Uses LoTW (with its last-upload age)
Settings -> Watcher: New "Spotter" type, with or without Regex, highlighted in the Spotter column
A plain Spotter watcher also covers the spotter's skimmer suffixes (W3LPL also covers W3LPL-# and W3LPL-2)
"Spotter" category in the Feed Roster's Settings -> Ignores, for spotters sending false or too many questionable spots
An ignored spotter's spots are dropped from the Feed Roster and the map (W3LPL also covers W3LPL-# and W3LPL-2)
Map / UI
New "DX Feed Spots" button in the main button panel (shown when DX Feeds is on) shows feed spots on the map
Green target: a rig is on the spot's band and mode
Teal triangle: a rig is on the spot's band, in a different mode
Grey triangle: no rig is on the spot's band
Shows all bands, following only the map's Band / Mode filters
A spot without a grid is placed at the center of its DXCC entity (its grid stays empty, e.g. in the Feed Roster)
Hover (or right-click) shows the spot's call, spotter, age, DXCC, grid, frequency, mode, distance, azimuth, time and message
Left-click sets the DX call and grid on a rig on the spot's band and mode, otherwise the active rig
New Main App -> Settings -> "Colors" tab: change any band's color, with "Reset Colors" to return to the defaults
Gridsquare Colors moved here from the Grids tab, above the Band Colors
Applies to the Call Roster, map spots, grids and pins, Stats and Lookup
Map pins are now drawn in the band colors instead of images
Worked: plain pin, Confirmed: black V cap, Live/heard: diamond head
MH4 pin mode with Mixed bands: logbook pins use the Gridsquare Colors Worked/Confirmed colors instead of a red dot
MH4 pin mode with Auto or a single band: logbook pins use the band colors
The confirmed V cap is used with band colors, not with the Mixed bands Gridsquare Colors
Fixed a logbook pin staying "worked" after its grid was confirmed, until the next map redraw
Fixed flight paths in the AEQD projection skirting around the poles instead of crossing them
App
All new text translated for every supported language
About 230 more tooltips, labels and status messages are now translated (main window buttons and settings, Call Roster settings, logging and test results, Lookup details); GridTracker feature names such as Call Roster stay in English
Fixed the Democratic Republic of the Congo (DRC) and Republic of the Congo flags being swapped
Fixed the Band Activity popout window not opening on macOS
